The main disadvantage of tubular centrifuge is intermittent operation

Tubular centrifuge type:

Separation type: it is mainly used to separate all kinds of hard to separate emulsions, especially for liquid-liquid separation (the specific gravity difference is greater than 0.1%) with very small density difference between two phases, and liquid, liquid and solid three-phase separation with a small amount of impurities. Separation of oil products, dehydration and dewaxing of transformer oil, edible oil, turbine oil, biodiesel, coal tar, lubricating oil, marine fuel oil, quenching oil; separation of various syrup agents; separation of whole blood -- Separation of plasma and blood cells from whole blood; separation of biological products; separation of oil and water, sewage treatment, etc.

Clarifying tubular centrifuge is mainly used to separate all kinds of suspensions which are difficult to separate, especially suitable for solid-liquid separation with low concentration, high viscosity, fine solid particles and small solid-liquid specific gravity difference.

Features of tubular centrifuge:

Through the separation of solid impurities in liquid, the effect of clarification is achieved. It is used to separate various suspensions which are difficult to separate. It is especially suitable for solid-liquid separation with small concentration, high viscosity, fine solid particles and small solid-liquid gravity. The solid phase should be taken out after shutdown.

The main disadvantage of tubular centrifuge is intermittent operation. The drum volume is small. Therefore, it is necessary to strengthen the separation performance of tubular centrifuge by strengthening the research on separation theory and centrifugal separation process.

There are GF and GQ series tubular separators, such as GQ series clarifying tubular centrifuges and GF series liquid and liquid separation tubular centrifuges.

characteristic

Through the separation of solid impurities in liquid, the effect of clarification is achieved. It is used to separate various suspensions which are difficult to separate. It is especially suitable for solid-liquid separation with small concentration, high viscosity, fine solid particles and small solid-liquid gravity. The solid phase should be taken out after shutdown.

The main disadvantage of tubular centrifuge is intermittent operation. The drum volume is small. Therefore, it is necessary to strengthen the separation performance of tubular centrifuge by strengthening the research on separation theory and centrifugal separation process.